Rev Counter

[Guest oldman]

Thanks mr president tried uploading photo the site tells me it is too big to post as you will have worked out not very good on a computor

[Guest oldman]

Tried to post photo the site tells me the file is too big and you will have worked out not very good with computors

[Guest oldman]

The site will not let me post a photo says it is too big

[Guest oldman]

Tried to reply to tim normans post posted 3 times but its not posting

[Guest mcramsay]

Easiest way to upload a photo is to make an account on www.photobucket.com and upload the photo to that website, it's like a personal photo album for your own photos, once the photo is on there it will give you a link you can copy and paste into a reply on here and the photo will show. You have to copy the link IMG link normally the bottom of the 4 links that are presented

[Guest oldman]

Cheers mcramsay had several attempts but no luck a message pops up telling me the following type ctrl/cmd+v cannot see a cmd key

[IanS]

I think that ctrl/cmd means either depending on keyboard.

Apple uses cmd windows uses ctrl

So this means press and hold ctrl or cmd then press v

this is a standard short cut for paste when editing

[Guest oldman]

[Guest oldman]

Thanks Ian managed it just need some one to tell me if the motor I have should have an ecu I cannot find one

[IanS]

That looks like it is EFI therefore will certainly have an ECU.

[Guest oldman]

Thanks Ian just need a picture of what the ecu looks like

[tractor]

Edited October 16, 2016 by tractor

[tractor]

[tractor]

that's a picture of a standard efi ecu but you may have an aftermarket one

[Guest mcramsay]

If you look at your MAF sensor, this is the silver aluminium part which has the air filter cable tied to it, you will see it has an electrical plug connected. If you follow the wires from this plug it will lead you to the ecu, expect it to join into a bundle of wires connected to various sensors on the engine, all this wiring will go back to the ecu.