biksz

yes its tyre touch drivers side touches the passenger side is about 1 to 2mm clearance

hi well got tie bars nearly fitted and got them on to check everything was ok and the bl**dy wheel hits the tie bar so either wheel spacers needed as the wheels could be the wrong offset for the car they are tsw 5 spoke which can no longer get so cant check offset on net,any one any ideas on how to check offset?

just ask her if you can try blow them up with the nipples first if that dont work keep the car.

look on youtube they show how to fit them and simon they fit side wards too so you could put them on your boonet i am thinking of some to make mine secure as i dont want it to happen to me.

found this on ebey 260584436350 i would have to make some extra frame to inside the nose cone so this would hang out the nose cone grill but not sure if good idea

ye thats what i was worried about with the nose cone just need to come up with something i think nut unsure how to approach it yet as not got nose cone fitted or engine in lol

has any one got or fiited tow hooks to their car as not sure where would put anything if ever broke down for towing?

contact gbs and ask them if iva freindly they should no if are or not.

just seen one called aerocatch not cheap but look good qaulity and very good for a fastener

have a look at these simon on ebay 110818593239

ouch at least it flew to the side and not straight over and hit you.use padlocks in future

did you do a compression test to see if compression was down?

why dont you put pics on of your car and let others have a say about the build?

you should see my car then its not perfect but its gonna be to some degree how i want it with the budget i got but every has an opinion

i dont see anything wrong with wiring or where the battery and coil are its why they are called kit cars because you build it how you want it nobody else thats what makes them induvidual.not two kit cars are the same

i have the original indicators i think they look similar to ones in pic will get a pic of them later and post it on.

the cycle wing ones. gonna see if 12/15mm bar can make some.seen them on ebay for a locost kit car they look easy enough to mod.

has any one used the gbs ones? as ia m after ones what can be took off without much problem the original are no good what i got and was considering making some up,has any one made some?if so pics please as not sure best place to mount them cheers.

paul you got any pics of extra 2x1 you put in cheers

no its not an advert it is just to let peeps no that i no some one who can make them if wanted and the ones i have had made are for the sierra front its 2b s7 sorry if it comes accross as an advert did not intend it to be an advert just info to help peeps out and try cut their costs on mods

if any one has got a 2b and have not yet done the tie bar conversion and are wanting to do the conversion then let me no as i no someone who can make the tie bars for £50 thats just for the mild steel bar and the machine work needed you will need to supply the rose joint for the conversion which can be obtained of ebay,and you will have to find the box section to make the mounting plates.hope this helps any one out

i just had some tie bars made lad did a great job and cheap aswell which made me happy bunnyjust need the box section now to make mounting plates.

looks good but bet you could make one cheaper

i have been thinking of a battery isolator with red ket as you can hide this to a degree

just got my tie bars today what a freind made for me and what a brill job too only cost me the price of mild steel 20mm bar and £12 for rose joints so happy bunny i is