Jump to content

****sold Robin Hood 2B For Sale *****

Recommended Posts

Well its come to that time when I have made the decision to sell my 2B.

So here goes:

Its a Robin Hood 2B with a 2L Pinto engine with an injection head.

It Has ZX9R bike carbs on a Danst Engineering Manifold

Type 9 5speed gearbox and sierra rear end.

Martin Keenan Custom built Silencer - giving it a sweet noise and put a smile on your face each time you start it

It has Full weather gear that fits

Has a set of 5 Uniroyal Rain sport 3 tyres that have done around 400 miles since fitted last year ago.

There are numerous other spares that will be sold with the kit. These include a Front Geometry kit purchase form GBS for the vehicle but never fitted, A brand new set of GAZ shocks that are still in their boxes.

The paint on the body is flaking in a few places, but its superficial, just a rub down, some primer and a respray and it will be as good as new

The log book is correct and its registered as a Robin hood 2B
Its MOT'd until April 2018. Its covered 16,708miles
I'm looking for £3995

I'm located in Crawley - will answer all questions and anyone who wants to view the kit with an eye to buy is welcome

Picture of the kit are here:

Edited by Onslow
updated MOT info
Link to post
Share on other sites

Cheers all. I did make it. Can't believe how much salt there put on the motorways!

I needed to wash down the dash etc with the amount that came running inside the windscreen. RH trial by fire.


It was definitely all worth it seeing the smile on my 11 year old yesterday on a blast in the sun.


Cheers for all the help Onslow

  • Like 5
Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By Wavey
      Here we have my Uncles Robin Hood 2b, built in 2004. Unregistered. No VIN plate for kit or for Donor Sierra. Sierra Based with 1.8ltr Pinto engine.
      The good bits.
      The car has been kept garaged all it’s life. The car starts, stops and steers. Body work in good condition. Cobeau Race seats. As new. Sabelt 4-point harnesses. As new. The wheels are in near perfect order with Yokohama tyres all round with no wear. New battery. New Fuel Primer. New front brake calipers Single Webber Carb with K&N filter No oil leaks. All electrics appear to work except for the rear fog light and indicators (new flasher relay in the post) Lots of paperwork. The not so good bits.
      No VIN plates for kit or donor car. Incomplete engine bulkhead. Incomplete inner rear wheel arches. The large Sierra Rad should really be replaced by a smaller one. The high position of the rad means that the reservoir can only be located where the battery ideally should be (ie higher than the top of the rad) The Rad is at an angle which means it's not close enough to the original fan. I do have an electric fan, but the rad should be replaced first before fitting. I’ve not had this car up to temperature, but I would expect it to have overheating issues .   For the reasons above, the battery is in a compartment in the passenger foot well. The Yoko tyres are like new, but are 10 years old ☹ The build quality is varied and a lot of it will require attention if this car is to be IVA’ed. Inertia heater matrix is fitted, but I don't think it's very efficient.   Selling on behalf of my uncle.
      Looking for around £1750 or near offers. I'm based in Bishop's Waltham near Southampton.
      Interest / further details via this email address please:-

    • By Nicholas Matthews
      Hi all. My names nick and I'm new here, I wonder if anyone would be able to help me. I'm after c20xe/let standalone management to run my turbo in my Robin Hood. Is there anyone out there that has one for sale at all. Ideally the xe standalone management. 
      Many thanks for taking the time to read nick. 
    • By George Laing
      For Sale 
      Robin Hood Polished Body Panels - inc. side panels, cockpit, rear petrol tank cover, rear light surrounds etc. good condition - will come up nice with a bit of elbow grease. 
      various narrow and wide wheel arches (will need repainting) 
      i prefer the skeletal look. 
      £200 ono for the lot 
      Collection only Snaith (Selby/Goole area) 

    • By raeautos
      Check on preloved website
    • By Spats
      Hi, I bought an old 2b with sliding pillar partially built - 2 years ago. Lots and lots done, basically rebuilding the entire car, bit of an engineering project!! and we have just completed a GBS wishbone suspension rebuild on the front and replaced the damn awful pillar suspension! The car currently has a mg metro steering rack on that we have removed. I want to go to a ford rack to match the sierra track rod ends and extenders we now have. Would a mk2 escort match or what have other members fitted? Any help would be appreciated
  • Create New...