edbond

Hi, I am not getting the time to fix a problem with my car, and also want to make a couple of upgrades to the car. Anyone recommend a garage that would be able to do the work in Worcestershire or nearby. Not adverse to the idea of another RHOCAR member if of interest (and they have their own car so i can see ) cash available! Problem: Indicators / Hazards. This has plagued mine for ages, I did a temp fix that was in place for 4 years. It needs that circuit rewiring and switch gear replacing. upgrades: I got an ali radiator from GBS - needs fitting (replacing rover radiator, so some fabrication needed) and.... i want to swap out the mechanical combined water and power steering pump to a elec water pump and ditch power steering pump. I have all the parts for this (well except hoses and any fabrication parts). Ideally I would like my seat to move, as previous builder welded it! Send me a message on here, or 07915089569 Cheers Ed

Great read from a fellow superspec owner. Thanks for the reminder about the window. Have been meaning to get that laminated for ages! ed

for others reference the timing belt kit was: K015289XS POWERGRIP TIMING BELT KIT S/D2

Think that would be very helpful!! ta, will try and make it!

out of interest did it clear the popping on overrun? mine does this. I believe Al R blocked up one exhaust port and this cleared this (and other issues around lack of back pressure)

This research really helped me out on friday. Wanted to get timing belt finally replaced as its either 23 years old (engine age from manufacture) or 7 years old (from first registration) so over due really dispite embarrassingly low milleage (4000). Garage was reluctant to do work, and we agreed on an hourly rate. Told them mine is a rover 220 and they ordered that timing belt kit. Fitted without incident and cost me £200 all in. Very pleased (oh and passed mot too!) thanks all, really helpful. ed

actually hadnt thought of doing that!!!

do you still want this? otherwise still available!!

Pm sent

I started to look into this - either an inlet or outlet is behind the pump...so you need to make a manifold to replace the existing water / powersteering pump and then supply water to that to get into (or out) of the engine block! Been a few months - have you got anywhere with this - I still intend to do this, and get a someone to tig up a nice bespoke manifold! Ed

all gone sorry (pending collection)

Collect Droitwich! £10 each. cans all good! E

I picked this up to fit to my superspec and instead wore a thicker coat...... Cant remember what I paid for it - just want it gone! Beer tokens £10 Droitwich U.K collect only Ed 07915089569

Sounds a really interesting project, you should start a new thread and get some photos up!! ed

Think they were Rover 200 stalks.

Cheers for feedback! Had a feeling I needed to do more research! Do want something that will last. You doing any more experience days Rich? Ta Ed

Hi All, I don't know where else to turn for advice I have a wanting for a lathe for when I need something round, a hole it it, shaped, notched, tapered, grooved and other things I don't need yet but will one day. They are a lot of cash, and I have no experience so not sure what things to look for. Most of my stuff is machine mart / axminster - so was thinking something like http://www.axminster.co.uk/axminster-model-engineer-series-sc2-mini-lathe-505102 Is it worth saving some more and look to get one with power feeds such as SC4? How important is knowing visually using a digital gauge what you are changing, verses measure, take some off, measure again / experience? Any thoughts, musing would be appreciated Ed

Definitely mean timing belt. Mine is 6 years of use old + the 5 years sitting in a crate, time to be replaced!

Hi, Anyone changed one yet? I've never done one before - so going to give it ago! Any hints tips (parts number for bits I might need like tensioners) appreciated. As water pump is separate won't have to deal with wet feet ta Ed

Do u have the wiring diagram for the kit? Ed

I liked this mini stove: https://youtu.be/fxaFXs0H0VA?t=20m41s Ed

Hi, I upgraded from the original shocks / springs to nice shiny gaz on my Superspec.....there was nothing wrong with the zimmers at the time they were removed, but they have a poor rep here! I changed them as wanted to help with grounding issues - don't use GBS for that sort of work, clueless is the way I would describe them! They are available for beer tokens to anyone who can find them useful! I'm in Droitwich, so collection really. cheers Ed

white spirit.......wood with water content less than 20%. All you should need!

Resurrecting an old thread, but anyone got experience of using these? They seem such a simple unit to add with a plain tank (no swirl). looking to replace my superspec fiesta tank with either kit spares one or obp with rover engine. Cheers Ed

We should arrange a midland superspec meet late summer!