Help please - When mounting the original 2B+ light clusters to the rear wheel arch. Does the face of the cluster need to be vertical when the car sits on the ground so as to meet the IVA requirement. It does not read as clear as for the rear fog light
Steve D
Thanks guys, I guess that I will need to connect into the Rad top hose and connect this to the top of the header tank and Tee into the manifold to heater line with the bottom outlet from the header tank.
Gents ,
Can some one help, I have been scratching my head for some time with this issue, using longborders diagram which is how I have plumbed my pinto where would an expansion tank be connected as my radiator which is from a seat Marbella is a straight in/out with no cap so the tank is essential with this setup.
Gents ,
Can some one help, I have been scratching my head for some time with this issue, using longborders diagram which is how I have plumbed my pinto where would an expansion tank be connected as my radiator which is from a seat Marbella is a straight in/out with no cap so the tank is essential with this setup.
Steve D
That’s what I have fitted, I just got carried away and pulled them tight now I can’t get them apart. I will give it another go tomorrow just don’t want to damage the rubber boot.
Hi Guys,
I am struggling to set up my front suspension on my 2B build can some one please help and describe the process for making the camber adjustment. Is it normal to split the top ball joint or remove the dummy strut from the hub bearing in mind that I have the improved wishbone setup so the cycle wing brackets get in the way when trying to adjust.
Manu Thanks
Steve D