Jump to content

Sebring Project


femster87

Recommended Posts

Guest 2b cruising

Hi, I've been looking again at your photo of the front end set up.

I'm a little confused with the front shocker lay out with the Armstrong.

I cannot see a link arm that will allow the shocks arm to move through the radial path they require without link arms.

Am I missing something?

Edited by 2b cruising
Link to comment
Share on other sites

Guest 2b cruising

Hi again. Yes I get the swivel part of it. What I don't get is you shock is solid mounted, you actuator arm is fixed to the top of your upright.

As your suspension goes up and down, how do you maintain a constant camber with the arm moving through a radial plane.

Link to comment
Share on other sites

  • 1 month later...

Well, there has been a lot of work going on quietly on the car but I have been too busy to document this. I will take some pictures later. The car has just been collected for paint. It will be back before xmas

 

WP_20151128_10_42_17_Pro_zpscume6xrw.jpgWP_20151128_10_45_39_Pro_zpsde4ln0v3.jpg

Edited by femster
  • Like 2
Link to comment
Share on other sites

  • 2 weeks later...

Update from painters

 

WP_20151211_15_06_20_Pro_zpsbnpmnzaq.jpg

 

WP_20151211_15_07_15_Pro_zpsdlse4as3.jpg

 

WP_20151211_15_06_48_Pro_zpsfzfgofc9.jpg

Bonnett is not wavy just the dust on camera.

 

I have the doors to finish and drop off. Also i need to chose the colour. blue or new range rover evoque cherry red. Suggestions welcomed

Edited by femster
Link to comment
Share on other sites

Guest 2b cruising

Your choice is the one that counts.

Mine would be full gloss none metallic dark blue with many coats of clear to get the rich deep finish.

I'm sure whatever you pick it will be terrific.

Link to comment
Share on other sites

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...