DAVE CASTLE
-
Posts
779 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Store
Community Map
Everything posted by DAVE CASTLE
-
I also recomend a 90 degree dizzy cap i.l find the part number for you, it gets a bit crowded around the dizzy and manifold Dave
-
it uses the diff drive shafts hubs and brakes but not the big tube sub frame same as the lightweight. Dave
-
I have a knn manifold i run the brake off of one tube ,as long as you have the non return valve in the servo pipe its fine. the dizzy i sent away to be rebuilt as new full mechanical advance £80.00 phone number on nw site Dave
-
Hi Mitch i've got a rod and possibly a spacer Dave
-
Mark put the angry grinder though the bolt from the inside and then put a new lock on Dave
-
Go to www.stagonset.co.uk Dave
-
Yes it is different its a monocoque Dave
-
Steve its a series 3 not a 2b Dave
-
Hi Guy make one up 17 digets numbers and letters and stamp it on the racking Dave
-
Hi Rick Im in Chorley just off the Hartwood roundabout Dave
-
Most people have cut the cable in half then joined it with u clamps like a mini exhaust bracket B& Q have them Dave
-
Hi Stuart go to the N W hoodies site full details on there, Dave
-
Hi Pablo its mild steel Dave
-
Hi Tom I would have thought without seeing exactly how far you are fuel lines,brake lines and wireing harness. fill in your location there is more than likely some one near you or an area meet. Dave
-
Thankyou very much gentlemen. Crap this getting old . Graham have you been talking to my doctor ? "enjoy your new bones " he told me Tuesday i'll need new knees within the next 3 years. Anyway i'm off to the sunshine for a couple of weeks, 2week cruise to Spain, Canaries and Madeira , sail from Southampton Monday. Dave
-
Well done Andrew built up inspection ,some offices come out to you ,but if not you will have to trailer it to to them. although you can drive it to SVA Dave
-
set of alloy wheels here off a sierra azure 5spoke i think Dave
-
Yes very pleased with it, GBS have done a nice neat job after i knocked the lefthand front corner off. It was a sub k with mc pheresion strut suspension same as 2b/04 it drives very good now not that it was bad before i bent it I can recomend them if anyones thinking of replaceing their pillars Dave
-
you still need to shorten the sump Dave
-
He means the sierra macpheresion struct remove spring then unscrew the shocker insert then cut the bottom off. Dave
-
Guess what Brian i've got one you can use Dave
-
diff ratio is not going to be 2.1 more like 3.92 should be a tag on it or if you have the vin plate of doner the code will be on there then check with haynes book , or its number of turns of propshaft to wheel Dave
-
Always drill the end of the crack before repairing Dave
-
Well done Chris it was a late lunch you passed me at the Pines roundabout about 2pm and i then followed you for about a mile to Whittle le woods in a sprinter window van ,car looked good red stainless no number plates Dave
-
Northwest hoodies site Dave