Redspec

Good tip Never thought of that Cheers Steve

Agree it's fake the warning letters are on Snoops http://www.snopes.com/computer/virus/postcard.asp Steve

Hi Paul hope this helps 770mm wide 500mm front to back 250mm high at highest point Steve PS it has a built in swirl pot

No problem I'll see what i can do on Monday when I'm back at work Steve

Hi Just repaced the fuel tank on my superspec 05 model the tank that has come out is like new. I think the tank is a fiesta one (filler) on the drivers side. FREE to any one that wants it. Collection only (but i can hang on to it untill anyone is passing) May suit anyone on a tight budget. No pump or level sensor. Steve

Hi Just checked my 2005 rover engined kit, the plug is grey, 3 wires, 1 white, 1 white with red trace, 1 brown. HTH Steve

Hi Richard Sounds to me like you require no more than a home visit from a couple of the 2B experts on the site, all it would require is the offer of hob nobs and a couple of plane tickets and oh yes the offer of accomodation for a couple of weeks. Steve

HI Rob / Pete Don't know how to do links but try this topic http://community.rhocar.org/index.php?show...p;p=64926 Steve

When did the Santa hat appear Ive Just noticed? Nice touch Mat Steve

If you leave it parked at the beach like that you will come back to find the Germans have put towls on the chairs

Came this morning great mag well done and thanks to all involved for all the HARD WORK that has been put into it. Thanks again Steve

Must be an up Norf thing still not got mine in Durham

Or put it in the hood and take it for a spin with the shocks set at max

Hi My gear change is stiff but ok on the move, reading a lot of old posts on the superspec it should improve with time about 2000 miles (thats if the RH clutch bodge lasts that long). Cheers Steve

A magnet works well and saves removing the paint Steve

Will payment be able to be linked in with the paypal system that is used for membership it's soooooo easy to use. Thanks Steve

Hi Ian I think its since you added the pics of the posh car, it makes the posts to wide for the screen and you have to scrole across to see the whole post? well on my screen anyway not really a problem but it took a while (ok I'm a bit slow) to see the link in your first post. Steve

Looking forward to getting mine, looks like they are now sold out Steve PS Ian did you know your post keep falling of the edge of the screen?

Shame you dont live closer you i could help you train. Go for it Tag

Hi Tony Great to see another NE hood meetings are at the Church Mouse just south of Ch-le-st on the way to Durham last Wed of the month only, been able to get to one since I got my hood due to other commitments, but hope to see you there. PM me if you want my nunber and we may get to go for a blast if the rain would go away. Steve

Thanks Jez I'll Give them both a call Steve

Not a cloud in the sky here in the "norf of norf" Steve

Hi Thanks for that I have seen a few posts on the subject saying just that, I was just hoping that someone had done the hard work! I was trying to avoid stripping the car to measure, putting it back together and then stripping it again to fit the new shocks. Thanks again Steve

Hi Just removed the tank to replace it and noticed the bottom bushes on the rear zimmers are shot so it looks like new shocks are in order. I know that lots of people have had to go down this route, does any one have the spec or part numbers for the front and rear units also what spring rating works best. Also does any one know who can supply the 4 off U brackets that I will require or is it best to fab them. The car is a 2005 superspec with rover engine Thanks Steve

Well at least it will be handy if you need to pick up any parts