Donnington Show.... Live engine swap in the main hall.

[Shaunhirst 26]

I was going to ask our main suspension supplier Koni what in that range would meet the requirement?

[MarkB 438]

The questions is as per the donnington web site will I drive away?

 

Of course it will .......... fingers crossed. If any parts needed have more than one part number listed Eurocarparts will send all versions just to be safe.

[Shaunhirst 26]

Any thought on those shocks?

[theduck 841]

Koni should be able to supply something but you would need to know the exact spec of your existing stuff. Maybe a step too far for the show?

[Shaunhirst 26]

Yep i agree I will take my time on that one

[Shaunhirst 26]

The engine has left the building and in the safe hands of tractor

[matvic 2]

Just been across to meet Shaun,

 

Well up for it, and amazed at the response of the club. Been through a few things with him and think we have made a fairly comprehensive shopping list. Looks like Shaun has blagged...got sponsored a lot of kit, so think we will have a busy weekend. Only big purchase/ blag he need to sort is some nice shiney wheels....found out the ones he had lined up wouldn't have fitted correctly.

 

Just a quick question though...will the 1.6 sump fit the 2.0l ok? Just that the 1.6 sump has been shortened already. So was thinking of a straight swap?

 

 

Yes, i put my 1.6l sump on my 2.0l when i changed it.

[Shaunhirst 26]

Great news just been to Northampton to collect some wheels ready for powder coat tomorrow

[Shaunhirst 26]

What size tyre should I put on them they are

 

15" Alloys

 

4 x 108 PCD

 

Rim width 7J

 

Offset 37

 

[theduck 841]

195 50 15

[Shaunhirst 26]

Any car / van passing doncaster on Friday heading for the show that could collect some stuff from my house?

[Shaunhirst 26]

Or Thursday night

[IanS 55]

Haveing just had to replace the core plug covered by the bell housing which requires engine out.

Check if new core plugs are needed.

[MarkB 438]

2 items not available from euro, oil spray bar and oil pump, available on eBay though shaun.

[mower man 545]

What size tyre should I put on them they are

 

15" Alloys

 

4 x 108 PCD

 

Rim width 7J

 

Offset 37

205 x50 15 on 7 inch rims 195 will be alittle stetched my ops only but have run that combo for 10 years noprobs 18 /20 psi for pressures, is as much tyre /rim width as you need mowerman