Rx8 Yellow Fuel Injectors / Any 450Cc/min Injector

[speedtripledan]

as title need some fuel injectors for the charger project

 

cheers

[owlman2222]

what type of injectors you after.

[speedtripledan]

Any make High impedance top feed 450cc flow rate will probably do

[Shaft]

Isn't 450cc a bit big for a 2 litre Dan?

I only ran 320's on a 4.6 V8?

[speedtripledan]

Use injector calculators for supercharged at rough target bhp of 250 and they come out around that figure

 

http://injector-rehab.com/shop/Injector-Size-Selection.html

Edited May 10, 2016 by DanE

[Tazzzzman1]

I ran the 450cc RX8's on mine Nick, was recommended by Canems and Roadrunner...ran a dream, just a tad thirsty. Needed them to make sure at full boost it was fuelling correctly

[Shaft]

That said mine was just NA though, not force fed.

Better rich than lean any day.

[ozz]

Don't forget you'll need one of these too.

 

http://www.ebay.co.uk/itm/KOMPRESSOR-BADGE-CHROME-MERCEDES-BENZ-C63-S63-E63-ML63-SL63-SL55-CLK55-SLK55-/191857895022?hash=item2cab9f266e:g:SKYAAOSwh-1W4d~8

[Guest 2b cruising]

No Dan. Not that badge.

Enough Berks in mercy as it is.

XJR or something of that mode.

Little sign in rear window.

"I love handling pressure"

[Guest lotusPaul]

You can go for a lower cc/min, just increase pressure.

[ozz]

The rx8 yellow injectors are favoured by mx5 turbo and supercharging community as a direct pnp swap on the mx5 engine. It might be worth signing up on mx5nutz loads of build threads and a for sale section.

Edited May 11, 2016 by ozz

[richardm6994]

. It might be worth signing up on mx5nutz loads of build threads and a for sale section.

As well as a section for what hair styles are 'in' this summer....

[jaimo]

Now now rich

[Longboarder]

I use Lucas 621031 on mine. High impedance and 444cc/min.

Bosch 0280 155 968 'Green giant' used in volvo S60 would also do.

 

Nigel

[Guest 2b cruising]

Now now boys.

You all know we are not homophobes, so don't worry.