-
Welcome to The UK Kit Car Club
Don't be shy! Join in the fun by registering to post on the forum, and to get full benefits you can buy 12 months club membership for just £20! Membership includes a quarterly club magazine, discounts with insurance companies and specialist suppliers, exclusive, early or discounted access to a number of events each year and much more!
-
Available Subscriptions
-
Recently Browsing 0 members
No registered users viewing this page.
-
Similar Content
-
By Burney
Hi all
My original glass bowl lamps are very attractive but very dull is there a replacement LED lamp unit I can fit?
The sidelight is non existant in the origibal lamp but the bulb and wiring is taped out the way so would be good to get a combo unit
Kris
-
By Burney
Hi folks
I'm a new RH Exmo owner. Great fun had at back end of summer although as the darker nights approached I noticed my rear lights are not working but the headlights are.
Indicators are off too
Are these all on the same citcuit/fuse?
Hoping to play with this problem over my xmas hols
There are a number of other electrical issues for me to work through but lights are a badic requirement for me to enjpy safe road fun
Kris
-
By Simon Parish
Well its come to that time when I have made the decision to sell my 2B.
So here goes:
Its a Robin Hood 2B with a 2L Pinto engine with an injection head.
It Has ZX9R bike carbs on a Danst Engineering Manifold
Type 9 5speed gearbox and sierra rear end.
Martin Keenan Custom built Silencer - giving it a sweet noise and put a smile on your face each time you start it
It has Full weather gear that fits
Has a set of 5 Uniroyal Rain sport 3 tyres that have done around 400 miles since fitted last year ago.
There are numerous other spares that will be sold with the kit. These include a Front Geometry kit purchase form GBS for the vehicle but never fitted, A brand new set of GAZ shocks that are still in their boxes.
The paint on the body is flaking in a few places, but its superficial, just a rub down, some primer and a respray and it will be as good as new
The log book is correct and its registered as a Robin hood 2B
Its MOT'd until April 2018. Its covered 16,708miles
I'm looking for £3995
I'm located in Crawley - will answer all questions and anyone who wants to view the kit with an eye to buy is welcome
Picture of the kit are here:
-
By mgzslad
Hi Folks
Had a dramatic change to my life and need to let my project go and I thought I would offer it to the members on here first.
It is a Robin Hood S7, Ford Cortina based Kit. It must be 20 years old but it has never been completed.
There is also an Mx5 1600 as a donor.
I want the whole lot to go as one. I will not sell off individual parts so don't ask.
S7 monocoque and bonnet in stainless steel. Rear wheel arches, nose cone, Butterfly and cycle wings plus all brackets. ford Rear axle. Front sub frame. Steering rack. steering wheels, ford and Momo. Crude dash with Rover instrument cluster. Ford instrument cluster. Windscreen and brackets. Carpet set. Hood set and frame, brackets and turn buckles. Stainless Pinto Exhaust. 5 alloy wheels with new tyres. Nuts, Bolts, bits and pieces. Ford wiring loom, Rover wiring loom. Front and rear lights etc. Boxes and boxes of bits. Edge trim. Stone guards. Wing mirrors etc.
Complete Mx5, part stripped and not drivable but was all working prior. Newish soft top which would sell on Ebay for at least £100. Good alloys again sell on ebay at least £100. Many other good parts that would sell. It would all help to reduce the cost of this project if you have the space and time which I now don't.
Collection would be easy with a decent size van and an A frame or trailer. The photos show the actual car but the complete one is just to show what it could be like.
My costs have been in the region of £1000. The first £450 can have it. NO OFFERS, SWAPS OR SILLY BARGAINS. CASH. I don't mind holding on to it till after Christmas but would like £250 up front as a none returnable deposit and show of good faith.
If not sold it will go on ebay starting at £500.
If you are interested get in touch via here and we can make arrangements to view.
Thanks for taking the time to view.
-
By Tweedy
Sadly, I am putting my 2B+ up for sale.It has had so little use for the last 2 years and I have other projects to complete.
The kit was purchased in September 2005 and was completed in February 2008.It passed the IVA first time on the 8th of February 2008.
The car is registered as a Robin Hood and is on a Q plate.
The current MOT expires on the 30th of July 2018
.
.The engine is a Sierra 2L DOHC fitted with a Weber 28/32 TLDM carburettor and a Motorcraft engine management system.The fuel tank is aluminium.
Full weather gear is included.
The bonnet is hinged in front of the windscreen.
Wheels are 15x6 alloys fitted with Yokohama 205/50 tyres.Suspension is via GAZ adjustable coilovers.
ETB gauges were fitted in November 2010 together with a birch faced dashboard.
Engine cooling is via a Coolman radiator and electric fan.
Sabelt safety harnesses are fitted and a fire extinguisher is included.
A new battery was fitted last year.
The car has always been kept in a garage.
A jack,spare fuel pump and spare engine management unit are included.
Price £3500
Let me know if you require any further details.
-