B2 Dash board

[apgodden 1]

I have just been told that my car is a S7 and not a B2.....  I have ordered a b2 Dashboard from kit car spares will this fit my S7?

[nelmo 241]

Ask GBS... 

[dandan62 27]

Hi. I noticed your  engine start up vid and the comment about it being an S7? You really need to know before swapping the dash unit. A 2B ( not B2) has a tubular structure ( as in tubey). The S7 is made from a folded flat sheet of steel to make a monocoque. From the little I can see in the video it looks like a 2B. 

[dandan62 27]

I'm not sure now! Just seen other pics you have. Sorry to confuse. Easy for you to decide if you do the tube or monocoque test. This will help also.

https://nw.rhocar.org/identification.htm

Edited July 1 by dandan62

[apgodden 1]

I do not have tubular chassis so take it I have a S7.  

Is the B2 better than the S7?

[dandan62 27]

I've got an S7 and am very happy with it. It's an older design but I'd just be happy with what you have. Pros and cons with both.

[tractor 1,060]

from your video it looks like a S7 but it could be a B2 cos i have never heard of that now if it was a 2B then i used to own one and it dont look like that 

[Peter Bell 114]

The 2B dash will be too big I’m afraid. (2B 2 B(ig))  sorry about that. 
look at the identification link sent.

what is registered on the V5 as the model.?

Edited July 2 by Peter Bell

[maca 61]

Model on dvla check as below:-

Vehicle Details

Vehicle make

ROBIN HOOD 57

Date of first registration

April 2000

Year of manufacture

1983

Cylinder capacity

1593 cc

Even they don't have the correct details.

[theduck 861]

Looks like an early S7 judging by what I can see of front suspension and the "chassis rails".

2B dash would be a straight fit but I am pretty sure could be made to work.  You won't get anything off the shelf that fits and unlikely to get help from GBS as they try to distance themselves from these models of roboin hood.