Help For The Donnington Engine Change

[Mitch]

im hopeing to get there Friday eve, if they want to leave a key wiith us and use club mobile to let peeps know when they arrive, cant we have cut off at say 10 pm?? mitch

[philshelton]

Btw: Ian at CKC says we can camp on Friday as long as peeps arrive before 8pm

Dont worry guys sorted after 8 ok

[BigLee]

Count me in Phil to assist. Just caught up with this thread as been on holiday. Arriving after work on Friday - so will be about 8pm. Will be in the camper - want a BIG Garage jack ??? From other thread I think most tools are covered.

[theduck]

Confirmed will be there Sunday.

[philshelton]

who is bringing what kit? Chris I think has engine crane. any one got engine stand ? work bench ( I have a old B&D workmate but will some one to get it there and back)

 

Engine Crane ....................Chris

Tools .................................Chris

Workmate...........................Phil via Chris

Engine Stand ....................Steve (via Mark)

axle stands.........................Nicko

Vice....................................Bob Fry

Torx bits.............................Nick

Valve sping comp...............Nick

Jack....................................Big Lee

timinglight...........................Andy (grim)

clutch alignment.................Nick

[Guest MarkB]

Steve has offered the loan of an engine stand, which I can pick up with the club stand stuff

[fry61]

Happy to bring a "Trojan Super Jaws" (google it) a free standing vice 0 - 900mm capacity, will be a definite asset if any pieces need fettling with file or hammer.

[Shaft]

I can bring the Torx bit for the head bolts and a valve spring compressor.

Also valve lapping tool and grinding paste.

[nicko]

I was going to bring a couple of axle stands, just in case.

Nick

[chris27]

Will be up for a bit of tinkling of the spanners!!

 

Done a few engine changes over the years!!

 

Will bring Bertha the torque reach to keep me company on a night and help out on sat if needed :-)

 

Will be there before 8 on Friday

 

cheers

 

C

[Andi]

Happy to bring a "Trojan Super Jaws" (google it) a free standing vice 0 - 900mm capacity, will be a definite asset if any pieces need fettling with file or hammer.

I came up with this on google images

http://i1212.photobu...Trauma001-1.jpg

 

 

unless its the triton super jaws

http://www.carbatec.com.au/triton-superjaws-portable-clamping-system_c21501

 

I have a worx jawhorse version with lumber and chainsaw attachment.. Dont know how i lived without it.. Great bit of kit

 

Andi

[fry61]

Freudian slip -- that bloke got a lot to answer for. Should of said "Elu Super Jaws" as marketed by Black & Decker ,parent company of Elu; which is a brand name I don't think they use now.

[richardm6994]

I can bring......

 

2 x battery drills, 4 batteries and chargers

12v impact gun

emery paper & some fine wet and dry paper

degreaser in squirty bottles

2m x 2m gazeebo

a couple of 100m reels of 2.5mm2 stranded core wire (various colored insulation)

gas soldering iron, solder, heat shink tubing.

loads of assorted nuts and bolts (m4 to m12)

 

 

Other things I think would be usful that I havn't got to hand....

 

wire brush wheels that fit into a drill chuck?

Multimeter (I know for a fact mine's buggered)

A selection of spade connectors? I can bring some red one's but have no other sizes

[richardm6994]

I've also got a brand new set of HT leads I can bring along....they are only missing the lead that goes between the coil and dizzy.

[Tazzzzman1]

I can bring multi meter, Probes, Wire wheel attachments for drill, sound meter (if anyone wants a noise test doing at the show)

 

Ohh and cleaning cloths for polishing :rofl: