Jump to content

stevedohc2b

Community user
  • Posts

    2,374
  • Joined

  • Last visited

  • Days Won

    6

Everything posted by stevedohc2b

  1. INNARLA CARAVAN AND CAMPING PARK address> Hallaton Rd Medbourne Market Harborough Leicestershire LE16 8DR tel> 01858 565478 pitches> 40 open> all year description> "The site is rather unique due to its situation built on an old disused railway line. The driveway itself-runs along the embankment giving an elevated view of beautiful countryside. A pool at the side of the road indicates the site entrance. The main feature is a large three arch railway bridge harbouring the kitchen and Tearooms set between high fossilised banks showing 400,000,000 years of evolution in the strata, many fossils can be seen protruding. On the Camping/Caravan field there is a spring pool, which itself is a haven for wildlife including Great Crested Newts. Although the pool is small it gives excellent fishing. The larger pool at the entrance is also teeming with fish" website> www.jgalway.freeserve.co.uk
  2. i am in caravan club and they have rally's in fields, so must be sites averable but never been to one Stephen
  3. Some of the Aldi stuff is very good value and 3 year warenty,
  4. Sounds good not to far for me as well. You must take range rover down track, my mate Hugh took his around the ring with as passengers point out the racing line :-) Stephen
  5. Ken that is great turning a negative in to a Positive. I vote Ken make a good politician :-) Stephen
  6. Loads of flyers printed for bash and club. Some ones kids are going to be very busy at Stoneleigh ( Richard ) Stephen
  7. I have the plywood option But if i had Bobs skills his is the best i have seen and keeps all the rain out. Stephen
  8. stevedohc2b

    Camping

    Looks good need to use the shed on wheels more. How about a weekend start of August as a get together. Stephen
  9. stevedohc2b

    Wiring

    This might help from haynes stephen
  10. stevedohc2b

    2.0 Efi Dohc Engine

    It should pass get a home tune man round tell them the age of efi to check if they can work on it ok. mine needed a new sensor after a check. or your local mot test station may help stephen
  11. Should I ask for appearance money. Stephen
  12. stevedohc2b

    Archs

    I replaced mine with black carbon look abs plastic ones as a cheap option as GBS wanted £90 From http://www.plays-kool.co.uk/acatalog/Front_Wings.html Stephen
  13. Top job probley the best 2B to be presented for a test. So top marks to all Stephen
  14. I would fix this ASAP we had a french member who's garage burnt out from a fuel leak problem and lost car. Think he had a heating boiler in the garage. I am sure that a local garage could replace for you if not able to access your self. Stephen
  15. Hi electo start on ebay and pinned in electronic . Are recomended and very knowledgeable supplied me a small dense (Raskel type) With a multi v pully. Ps bob florin metal works has a C V H Stephen
  16. That why I did the stickers Kit car bits may fall off Stephen
  17. Check House insurance A good one will also cover them at university Stephen
  18. Looks good but a lot of driving then a night in a tent, not a holiday more a test of endurance for car and driver. Stephen
  19. Soft bits for sevens, Or Lesley store a designs Chris Newlands has some bits from her. Stephen
  20. it is simple to run the original pump off the back of belt . just need an idler pulley loads out there Kit spares, retro ford, race line etc Stephen
  21. I did this with a DIY kit on my sons saxo used carb / injector cleaner and ultrasonic wash bath ( jewellery cleaner ) a 5 volt supply a length of fuel hose . soak in the ultrasonic bath the attach hose to injector fill with cleaner, pressure and work the injector with the 5 volt supply. lots of vids on you tube worked a treat Stephen
  22. I think you need the new frame with a bevel edge ti get through test. if on road could still use if fitter as others have suggested. i drilled the frame and tapped the holes fitting counter sunk bolts from the inside bonding in, then domed nuts on the out side of the side supports, stronger than the self tappers supplied? Stephen
×
×
  • Create New...