nelmo

You were going to powder coat stainless steel? Is that even possible? Or is that way to effectively paint it? Surely that can be straightened out? If not by them, they should pay for someone else to. Best bet is to call Kit Spares - they may be able to help.

Got mine - works well for me

Nice one - I haven't done that run for a couple of years now but I remember that Alfa Montreal - he still has those horrendous, modern black wheels on it!

Get the wheel alignment done - I had zero re-centering before I had mine done and only just squeezed through IVA due to a very kind tester. Not dangerous really, just ruins your tyres quicker. Unfortunately, most normal alignment places won't be able to do a kit because their equipment won't fit under the wheelarches. I had a mate with one of those home laser alignment tools - did mine in a pub car park one evening

Yes, I did think that was possible but I wasn't sure...

No, if the V5 looks OK, no need for an IVA (SVA is the old system that IVA replaced). Only needs a new IVA if you change the chassis/body in some way - changing the engine is fine but you need to tell the DVLA because it may affect what emissions you need to be tested for at MOT time. Engine number is irrelevant these days - mine is blank because my engine was brand new from the warehouse and they don't stamp codes on them until they get to the factory.

Darn, booked up that weekend, looks fun...

Where are you, Paul? I'm in Reigate... I'm the area sec for the SE but it's been hard to get anyone out - we had a couple of meets last year but even then, I was the only one with a working kit . The weather is improving, so I'll try arrange something soon...

Are you sure you called the right place - not GBS, GBC: https://www.facebook.com/GBC.Autos.Tamworth/?locale=en_GB

Why on earth would you do that? Most people convert TO FI, not the other way round Sounds to me like you're not running on all cylinders ( I mean the engine but I'm not sure about you either ). Check you're getting a spark to all cylinders? And carb setup but I know nothing about carbs...

Do you know roughly what needs doing? Could it be driven to an IVA test? Might be worth taking it, failing but getting a list of fail points so you can show it to someone and they can quote you to fix it. An IVA retest is only £95. Richy on here runs a garage called GBC (?) Autos in Tadworth. Give him a list and he should be able to give you a quote.

A seal will only work well if both mating surfaces are flat and smooth - I'm guessing yours aren't? Probably why there is sealant there from before? Not sure if you can get petrol resistant sealant but that seems to be the way forward?

I got mine done at this place: https://www.varatechnik.com/ ....when John Lamsley worked there (ex-Emerald employee) but I'm not sure if he still works there (he's not listed on the website). John has a FB group called 'Emerald ECU tuning tips and advice' - you can ask him on there where he works? EDIT: ah sorry, just realised you said 'Herefordshire' - I read it as 'Hertfordshire'

I have no experience of Pinto engines, I'm afraid. My Zetec starts off very high when cold (700+ kPa) and then settles to around 3-400 when up to temp, which I believe is normal for a Zetec...

Looks very good - my blacktop Zetec is like that at idle and I always thought the Pinto's were supposed to be lower? As an England fan, damn right - I was worried about the wooden spoon for us before the start. Beating Ireland was miraculous! Really good competition this year - so many unexpected results (except for Ireland, of course)...looking forward to the Autumn Internationals because I'd imagine we'll get hammered by the SH teams - but need to play those games to improve... I'd be interested to know what you guys thought of the 6N - some of the Welsh play, for example, was downright embarrasing last weekend

Pull the HT leads one at a time - if the knocking stops, you know its the engine and which cylinder.

Ha! Shows me to be wrong again - there was a quick fix

I'm afraid this is all electrics and almost every kit car is unique in that respect. You need to get a multimeter out and test the wiring from switch to motor, test the action of the switch with the multimeter etc. Sadly, there are rarely quick fixes when it comes to electrics....

That's very kind of you - you could make a bit of cash on that engine alone. I'd put it on ebay as an auction starting at £50... anything you get is a bonus and much bigger audience than here.

@richyb66 can knock one of those up in no time Crazy Scandinavians...too many long winter nights...

Great looking car you have there - cool colour...

Yeah, with your ramp and garage of tools, maybe...

I've got a Honda NC700 that I used to commute on but since covid, it's hardly been used, sadly. Mainly, this is because of the Zero taking over my fun trips out. I've recently bought a 2005 Porsche Boxster and I can't afford to keep it and the Zero, so one is going in the next few months . I'm having a nightmare trying to decide which one.... Skoda Kodiaq is the daily car, needed for the caravan, although we're thinking of selling that as well as we just don't use it enough.

Nice - what the heck is that thing on the right of your pic - someone in the club? Is that a Grinnell or something - looks cool. Although missing a front number plate

I've got a GPS speedo and it is FAR more accurate than my manual one ever was . The OP may be able to buy a standalone GPS receiver and connect it to the dial?