MarkBzero

I am so jealous about the Robinhood rear tyre hoop. Keep it on, it will be great for spare tyre, tow hitch and extra protection for crash.

Thank you.

My diff is being refurbished, new bearings and seals. Million pound question do I fit a LSD unit? Sierra diff with push in drive shafts. Which LSD's are better for our kits?

This might work https://www.pegasusautoracing.com/productdetails.asp?RecID=7579

Not a foam filter but would be a lovely addition to any pinto. https://www.ebay.co.uk/itm/Ford-Capri-escort-etc-pinto-alloy-k-n-air-filter-top-for-larger-k-n-/283747521490?_trksid=p2349624.m46890.l49286

My original bespoke exhaust was built by Ashley exhausts in Birmingham. Perfect primaries, 4, 2 and 1 pipe work. With an added bonus they will give you two receipts one for the car and one for the wife

I have similar seats and they passed IVA. As Bob said if the the belt goes through the seat and press on them i.e. the belt pulls the seat down because the anchor point is to low then the strength of the seat is taken in to consideration. If the belts go through the seat slots and pull directly forward with out causing any force in the seat then you will be OK.

Loads of Mac1 kits out there so it is possible. As Richy said start with the IVA manual, any issues or clarification post on here we are a helpful bunch. Approach the IVA prepared but don't worry about failing about 75% of home built cars fail. But look at it as a short list of fixes to get roadworthy. Mine failed on emissions, reverse light not working (did when I left my house) and no rubber covers on starter motor terminals.

Better fix the kit and get it mot'd.

Looking good, I have seen similar with a piano hinge through the center. Allowing then to be folded and slid behind passenger seat.

Thanks Richy and Stu, appreciated. T-shirt and hoodie ordered, to account for the extra weight from lock down.

I have thought about type approved, but being a B reg it was before the rules were made. Second to this most plods and MOT testers for that matter look for the silver sticker. As Baldrick would say "I have cunning plan", using an old Ford focus tow bar kit and you've guess it the silver sticker is still fitted.

Sold to fellow member in Hampshire.

Hi, I am selling a ATR lowered sump from GBS https://www.kitspares.co.uk/index.php?route=product/product&product_id=1190 £150 used for last season includes modified oil pick pipe, new cork gasket and magnetic sump plug. Ideally pick up due to size, or I can post tracked/signed for service for another £15.

RWD = rear wheel drive, they tend to shortened to give more ground clearance. I will have a ATR sump for blacktop for sale soon. I got a kit off eBay for engine mounts, tacked them myself in situ and asked friend to do a proper job. You do not need a water, it looks cleaner and you easily fit temperature and fan switch. Some have used original thermostat housing and pipe (hoover tube).

Burnt once, never again. There are a handful of people I would trust but have known them for 10 years. Oh and I know where they live so I can send a few of the lads around.

I have both in not so sunny Telford, which might be to far. My terms are favourable, to club members £100 cash deposit in UK sterling none of that funny Scottish stuff from up North. Non-members and newbies £200 cash deposit. Cash deposit returned when I get the engine stand and crane back in good working order. That's for 3 months, anything longer you lose £10 of your deposit every month. Which I think is a bargain.

It's not the cheapest hobby, but then at 20 mpg who cares.... Sorning the car for half the year might help. I have only done this once in the 7 years I've owned the car but that was down to an operation.

I like the forum over Facebook, I can never find anything on FB. It could be an age thing and fat thumbs!

I might have shorter ones in the garage, what diameter do you need?

Tempted, do you know if there is camping? I cannot find anything on their website or do I slum it in a warm hotel with full English...

Yep, you've guessed it the 1.8 is 80.6mm https://www.burtonpower.com/nural-piston-ford-1-8-16v-zetec-80-6mm-23984-std.html

The 1.6 is 76mm according to Burton's https://www.burtonpower.com/nural-piston-ford-1-6-16v-zetec-e-76mm-23983-std.html

I'm sure the 2l bore size is 84.8mm. I will check my notes.

Fingers crossed.