Donor
Have a question about the donor car? or what you need...
387 topics in this forum
-
Looking at using the wheels from my donor on the Zero, so I will need wheel spacers. I know that the offset needs to be RT15. My questios are; Does anyone know what the offset of the sierra wheels will be? How do I find out the offset of a set of wheels? (I have another set of alloys from elsewhere) If I need to get from RT15 to RT35 say, I take it I need 20mm spacers. Thanks Bill
-
- 2 replies
- 999 views
-
-
Would a Ford RS 2000 engine fit the sierra box easy enuf??
-
- 5 replies
- 1.3k views
-
-
Hi Guys, I have had a RobinHood Exmo for 5 years with a 1.8 sierra engine fitted. I am wanting to replace the engine with something a bit more powerfull maybe a 2.0 Zetec Engine from say a mondeo! I am trying to find out if this engine would fit together with the existing sierra gearbox or would I need to replace this too? Would anybody recomend an engine? Any help would be appreciated
-
hi everyone, just sent sva forms off and hoping all is ok with zero,anyway my question is i would like to keep the sierra number for my zero which starts F 700 does anyone know the process to keep the number and to transfer it or do you just get an aged related plate and thats it? jess.
-
I have nearly finished stripping my donor and am getting confused about what to do when it come to scrapping the car. Is the following correct:- Take all identifiable bits off the car, vin plate etc.. Take to scrappy Dont had over V5 but get receipt (will they need to see V5 for the receipt?) Scrappy said they can do a receipt but need to see V5! DVLA said to hand over V5 and keep a copy of it for when its time to register the kit!!!! (dont think that will help) Help!! I know its been covered before but every time I look things seem to be different depending where you live, time of year!! Thanks Rob
-
Have just got a donor for my zero, but it comes with the 2.0 DOHC engine:- SO .. do I just give up using the engine and find an other type or do I try to fit it? If I was going to go for another engine which would people recommend eg. Pinto, zetec, vauxhall red top etc.. (There might be a chance of a rover 600 turbo engine, does anybody know if this would fit a zero?) Has anybody fitted the DOHC to a zero, what mods to the engine are needed to make it fit without putting huge holes in the bonnet? Funds are tight at the moment so fitting the DOHC would be preferable! Thanks for any help Rob
-
- 12 replies
- 1.8k views
-
-
Looking to buy my donor in the new year, couple of questions; 1) What is the best age/reg range to go for. I want to be able to run on unleaded, but don't want to have to fit a cat. I know there is no difinitive answer here, but a guide would help. 2) Can any pinto engine be altered to run on unleaded? 3) I know that the fuel injection engines will not fit in the Zero, is this just down to the fuel injection unit being too large or are there other reasons? If it is just the fact that the fule injection system is too large, would it be possible to remove it and use a bike carb conversion (which I entend to do anyway) Thanks
-
- 22 replies
- 4.9k views
-
-
Just fitted a bigger engine into my 2b .But dont know the vehicle it came from. will I need to know if I notify Swansea or will I just need the engine number thanks jon
-
Been in the garage stripping the donor. I have got the diff bolts (2 through bolts, 2 front bolts and 4 rear mounting bolts) out and the diff will to drop. It appears to be the rear mounting but I cannot see what is holding it. There is another rubber behind the mounting but nothing obvious as to how to remove it. Any ideas?? Car is a 1991 2L Ghia with disks on the rear and lobro joints. Thanks in advance Barry
-
The handbrake I got with my zero didn't have the microswitch for activating the brake warning bulb to test it. 1. Is this a requirement for SVA and if so, is it possible to buy the switch assembly these days? 2. If a switch or test button in another place is sufficient, where do you think it should go, somewhere on the dash or is it OK to hide it? Luca
-
- 10 replies
- 1.8k views
-
-
First post, so be gentle. Looking at building a Zero, but I only have limited space - single garage and little chance of leaving a stripped out Sierra on the drive without causing considerable marital discomfort. I am therefore looking at buying, stripping and getting rid of the donor before I get hold of the kit. I obviously have the list of parts from the Zero website, but I'm sure there must be other parts that may come in useful. The build needs to be as "cost effective" as possible, so any additional parts that can be recycled would be advantagous. Any suggestions? Any other tips on donor aquisition welcomed.
-
HI folks I recently changed the gearbox in my 2B.Straight swop type 9 5 speed.I also swopped the speedo drive as I figured the old one was reading correctly.I now find the speedo is reading about 8 Mph slow.can anyone out there explain why.Will it be possible to change back.It looks a tricky job.Thanks Stringy
-
Seeing the latest rash of builders and blogs I though it might be a timely reminder to those grafting away preparing rusty lumps of old sierra metal for painting. There is a good thread on electrolysis on locost builders here, an it is magic. Beats wire brushing unless you're in a big hurry. Nigel
-
Hi all, Fitted the copper piping today and came to fit the calipers to find that RH had sheared a bolt in the process of removing one of them. I tried using a pack of screw removers from Halfords but it has been in there so long it just snapped them. How easy is it to drill it out and re-thread? Would this approach work? If not, has anyone got a spare? (There from a 1.8 as thats the engine but i do have escort parts they gave me too. The calipers say P29 and P30 on them.) Cheers Graham
-
Hi, could someone help, is it posible to tell if a sierra has a type 9? (from year or engine type) I'm looking at this sierra on ebay and the bloke is not sure what type of gearbox. (he has confirmed that it is 5 speed) http://cgi.ebay.co.uk/ws/eBayISAPI.dll?Vie...E:X:RTQ:GB:1123
-
Me again, person of 1000 questions !!! So I've now got all my doner parts and have started the slow slow process of cleaning, managed to paint up the gearbox and diff so far but the rest are pretty bad so I have 3 questions..... 1. I intend to clean up the small items using electrolysis - does this actually work?, not just for rust but also ground in grease? 2. I'm thinking of buying a very cheap sandblasting gun (£8.99) from ebay for things like the side of the engine to really clean it up - is this wise? 3. this isnt a cleaning question, the rubber boots on my drive shaft are perished, whats the best way of replacing - do I really have to hack saw off th…
-
- 7 replies
- 2k views
-
-
Hi all just started building a zero, brought a donor kit from gbs, i need to get drive shaft nuts off to remove stub/wheel bearing,questions are what size nut, are they handed ie nearside left hand thread (is that the long one or shorter one) is it possible if removed from vehicle,and any ideas how. Thanks all
-
I have a 2ltr pinto engine, 205 block on carbs (unfortunatley cant find an EFI), I now have an offer of a 1.8 K reg sierra, will all the gearbox and diff be good as a combination or should I keep waiting for a (non existent) 2ltr efi sierra?
-
Does anyone know where I can get new rear Brake disc dust shields / backplates? Ford have discontinued them
-
- 1 reply
- 918 views
-
-
been informed by my father that dolly sprint alloys wont fit onto the ford hubs but that there might well be an adapter to allow fitting does anyone know anything about this or preferably where i could get one? also are dolly gauges ok to pass sva?
-
- 4 replies
- 1.3k views
-
-
Could anyone advise of anywhere I could source a Mk3/4 Cortina back axle. I have managed to wreck the existing one on my 3A approximately 70 miles after purchase!!
-
- 2 replies
- 1.1k views
-
-
well, things are looking up. I have a promise on a 91 (J) 1.8 CVH Sapphire, for £100 Will have the final nod on Tuesday. Garage is ready, Will spend the other £100 earmarked for the donor on a 1.5T Wolf engine lift advertised in the paper yesterday
-
Hi all - I need advice quick - I have put my Lightweight up on eBay mainly due to not having time and finding it hard to get a suitable donar car. Anyway as soon as I put her on eBay I get offered a Ford Sierra 1.8 CVH engine 1988 model. I'm thinking I'll keep the lightweight now and go for this car but I want to make sure that the 1.8 CVH engine will be suitable for the Lightweight. I know its hould be a PINTO engine but man its hard to get those these days SO - will a CVH 1.8 with all the gearbox etc be a good fit for the Lightweight?? HELP!!
-
- 23 replies
- 6.8k views
-
-
Ive got a dolamite based S7 that still has the original dolamite axle in. Im buying a sierra for the engine and box but was wondering whether it is possible to update the rear suspension with the sierra setup easily? Thanks Elliot
-
- 6 replies
- 1.6k views
-
-
Hi, I have ordered a Zero kit which I will collect in May, have to finish shed first. There is a Sierra Diesel local which I can get for €20. Will the gearbox on this match to the newer Zetec Ford Engine. Think I can get my hands on a 1.8 Zetec. Thanks for the help.
-
- 10 replies
- 2.1k views
-